Ivoclar Systemp.Onlay & Systemp.Inlay Universal Refills
Detail
Systemp.inlay and Systemp.onlay are light-curing single-component materials for the fabrication of temporary restorations and do not require the additional use of a temporary cementation material.
Systemp.inlay is particularly recommended for deep inlay preparations with parallel walls as well as for sealing implant screw access canals and for relining prefabricated crowns and bridges. Systemp.inlay is available in two shades, universal and transparent, and in two delivery forms (syringe and Cavifil).
Systemp.onlay achieves a more rigid final cure than System.inlay because it features a higher content of inorganic fillers. The higher strength of Systemp.onlay provides advantages with regard to retention and occlusal and sagittal bracing. Therefore, the material is suited for large preparations.
In addition, Systemp.onlay is suitable for long-term temporaries, flat preparations and preparations with strongly diverging walls. Systemp.onlay is available in two shades, universal and transparent, and in two delivery forms (syringe and Cavifil).
COMPOSITION:
Systemp.inlay
The monomer matrix consists of high-molecular dimethacrylates. The fillers are highly dispersed silicon dioxide and copolymers. Triclosan, catalysts and stabilizers are additional ingredients.
Systemp.onlay
The monomer matrix consists of high-molecular dimethacrylates. The fillers are highly dispersed silicon dioxide and copolymers. Triclosan, catalysts and stabilizers are additional ingredients.
INDICATION:
- Systemp.inlay is especially suitable for deep inlay preparations with parallel walls. Systemp.inlay can also be used if small undercuts are present.
- Systemp.inlay is also suitable for relining prefabricated, temporary crowns and bridges made of polycarbonate or methacrylates.
- Systemp.inlay is also suitable for sealing implant screw access openings. &ndash
- Systemp.onlay is especially suitable for large preparations (onlays). If undercuts are present, please note that after curing, Systemp onlay is less elastic than Systemp.inlay, which may complicate removal
Storage temperature: 2 &ndash 28 °C (36 &ndash 82 °F)
Technical Specification
Standard - Composition | (in weight %) | |
  | Systemp.inlay | Systemp.onlay |
Polyester urethane dimethacrylate | 49.4 | 29.4 |
Ethyl triglycol methacrylate | --- | 7.5 |
Highly dispersed silicon dioxide, silanized | 16.4 | 19.4 |
Copolymers | 33 | 42.7 |
Catalysts, stabilizers and triclosan | 1.2 | 1 |
Pigments | < 0.1 | < 0.1 |
Warning:
Unpolymerized Systemp.inlay/Systemp.onlay should not come in contact with skin, mucous membrane, or eyes. Unpolymerized Systemp.inlay/Systemp.onlay may have a slight irritating effect and may lead to a sensitization against methacrylates. Commercial medical gloves do not provide protection against the sensitizing effect of methacrylates.
- Good adhesion to tooth structure no stickiness to instruments
- Two degrees of elasticity
- Fast curing and high curing depth
- Low polymerization shrinkage
- Minimal marginal gap formation and water absorption
- Two shades colour stability
- Easy to remove in one piece
- Antimicrobial agents and reduction of undesirable odours
- 3 x 2.5g Refills